1/100 Lanzegeist Inner Frame *Official Photos*

Hey All,
   I got my new light box today for doing photoshoots, and I wanted to get the inner frame photographed so I could start putting the armor on the kit.  So without further delay here are the official inner frame box images for the kit.  (At least I think these are going to be the final images.)

I will post the full finished photos of the kit with the armor on as soon as I finish the painting process.  I still have about 5 small parts to paint and then to assemble the Hulkatr Cannon before I can do a final assembly before I take the final images.  This process has been a long time in working,and I'm nearing the finality of the box art paint up.  I will keep you all updated.

Stay tuned mechaholics...

LG Internal Frame Painted

Hey All!
   Today I finished the last of the internal frame parts.  So I thought to take some quick photos and share it with you!

The internals are finished, and I used a few decals here and there to add a hair of detail, but

Fleischer Truppe Figure Sculpt: Part One

Hey All,
   I felt a bit of inspiration today so I started my sculpt for what I'm calling the Fleischer Truppe.  I think that roughly translates to butcher squad in German.  The concept is that this is a chemically enhanced and engineered human soldier who fights what are called "smiling men".  The smiling men are humanoid predators that have the ability to unhinge their jaws, making their mouths open quite wide which makes their lips and mouths always look like they are smiling.  Long story short the name Fleischer Truppe is a name given to the soldiers who fight the smiling men to embolden the humans in their fight against the superior predators they fight.  This figure I'm sculpting is going to be a 12" figure with articulation all over, and hopefully good detail.  It's my first organic looking sculpt so I may have to rework or remake certain parts as I'm going, but that's how I work anyway so nothing new there.  I'm starting with the basic muscular humanoid form, and then I'm going to add the armor on top of that after the form is finished.  Here is what I did today.

I'm using sculpey for the sculpt.  I find that the super sculpey is better for this work as it holds fine details well, and is easy to bake quickly.  For the larger forms I've just rolled up bits of aluminum foil and just sculpted a thin layer of sculpey on top of that.  

10/17/12 Lanzegeist Casting Update

Hey All,
  Just a quick update tonight showing the parts we have poured so far!

I'm gonna need another table to cover with parts!  (And then three more haha.)  I'll probably start on the instruction manual soon.  (Although I need my Wife's big smarty brain to help me figure out the layout haha.)  There are so many parts (yeah I know not compared to most kits haha), about 155+ not including screws and nuts and such.  Just keeping you guys updated on the progress, don't want ya thinking I'm just bummin about.  Wifey and I are working on the castings twice a night and her help is invaluable and allows us to make great parts stress free, and much faster.  I hope you all are as excited about this as I am!

On a side note I will be putting together a SB Tutorial soon when I have a good day to do so, just going over some basics and the tools you need to do them for any aspiring scratch builders or mecha sculptors that may want some help.  (I'm not qualifying myself as expert, advanced, or super skilled, but simply answering a request made by a bunch of cool people asking for a tutorial.)

Stay tuned mechaholics...

Lanzegeist Casting Update!

Hey all,
   I just wanted to do an update showing my progress with the kit casting.  Here is a photo of the parts that the wife and I have poured so far.

What we are doing is basically pouring the entire quantity that we need for each part to make 10 kits, and then moving on to the next set of parts.  It seems to be the most efficient way.  Like I said I am going to be casting 10 copies of the kit before we move, and so far I have to say 8 of them are reserved.  If you have let me know that you want one I appreciate it, but you may want to do so again so I know for sure.  If the number of kits requested is above 10 I may make a few exceptions up to maybe 12-14, but no promises as I do have time constraints and such.  So again if you want a kit cast, make sure to either comment below or better yet email me at onecoldnight@yahoo.com and use the subject header "lanzegeist kit".  That way I'll know to add you to my list and make sure yours is reserved.

Here is a video update showing basically what you see above, but with the moving pictures of a cinematograph!

Video link in case video is not embedded correctly:  Lanzegeist Casting Update Video!

Good news and bad news

Hey all,
    I guess the blog title sounds a bit more ominous than it really is, but it's been a day of mixed things.  I had planned to print out the drekky instruction manual and finish up the packing for sending out, but that was before our male ferret started having seizures and had to be put down.  It's been a rough year for relatives passing away.  Le sigh.  And the not necessarily comparable but still downer problem I was having with a particular mold today just compounded my already kinda crappy day.  (I have a particular mold where the surface of the mold keeps getting a weird matte surface quality to a part that is usually pretty glossy, the parts are still good but it just makes it look like there is a surface quality flaw and I don't know why it's happening.)  So today I just haven't really felt much in the mood to do anything productive. 

  I did, however decide that it would be a good day to maybe start rounding up the cured lenses and toy with them for a few minutes.

I'm pleased that a good portion of the lenses came out wonderful.  Some were oddly shaped or distorted and gotta be tossed out, but most were good.

I took one of my old kits that I modified a little bit when I was first learning to model (an old crappish kampfer mod I did) and cemented on a little bit oversized pink lens.  I used pink as in the animations usually the mono eyed mobile suits have pink eyes when the suit is on.  I used a slightly oversized eye because it catches the light a little better and shows off the clarity.  The smaller better sized version is harder to photograph well, but I do have plenty of those too.  I think I'm gonna use these for my SMS Kampfer conversion kit I'm gonna build soon.  Anyhow here are some eye lens photos.

DISCLAIMER: The work and paint on this kampfer head is old and I just grabbed it to test out the mono eye lens, it's not my current work.  

These took four hours, but they're pretty!

Hey all,
   I decided to go ahead and make a small mountain of mono eyes, lenses, and random round things tonight.  Not that I just had tons of extra time, but I couldn't wait to test the colors and get some small lenses cured.  I made sure to make tons of the pink ones for zeon mono eyes for any future builds like that sms kampfer conversion I got a little while ago.  I also have a neat idea for the clear lenses that I haven't seen done before that I plan to share soon once I make a test version.  (possible detail up add on part kit accessory)  But anyway here is my bunch of curing colored clear apoxy resin.

I mixed up the clear apoxy resin and since it has a 5 hour pot life (really more like 3.5 with the conditions in this room) I had plenty of time to color tint the various little pallets of apoxy.  I carefully used a bamboo skewer and dabbed it into the liquid and let gravity do the rest when I dabbed it again onto a smooth mold top.  I use the tops of various molds because they are smooth number one, and two because the apoxy won't cure to it.  Now there are some oblong shapes and circles that merged or were made mishapen, but no worries as if even half of them are good its a crapload of good lenses of various sizes and colors, and this in reality only took 65 grams of apoxy.  Yeah and I had a ton leftover because I'm stupid and always mix too much.  hehe.  So it would require even less than I used by half.  But you do need a certain amount of material just to make sure your mix ratio has a little play.

Neon Clear Casting!

Hey All,
    The neon yellow clear beam saber blade finally cured enough to demold and I wanted to show it off. 

I gotta say I like the coloring.  I think it will look sweeter once it's dunked in future floor polish.  I'm gonna try out a pink one next I think. 

The clear stand was cured enough to demold too.  I gotta say I really like it!

It still needs a little bit more cure time to harden all the way as this clear stuff takes FOEVAH!  But it will add to the kit presentation a lot and I think I really may use these for the sellable kits.  I am going to try to have an update on the different color casts of the clear lens parts next.  I may pour those tomorrow night in a variety of colors and sizes.  I also have a friend who is starting up working with aluminum so we all may have the capability of designing and making our own custom aluminum parts soon!  But I'll fill you all in as that happens.  He's working on making the LG thruster vents in aluminum right now, but I'll fill you all in as that happens.

Stay tuned mechaholics...

DIY Clear Tinted Detail Lenses

Hey All,
   I just had a kewl experience yesterday with an experiment I did.  I had poured a bunch of clear apoxy resin for my clear parts I'm casting for the kits I'm gonna sell, and I had a bunch of extra clear apoxy left over.  Let me start off by saying I hate wasting materials when I don't have to.  So with that in mind I had to find something to use the material for, and I found it.  Clear lenses!  Now these don't look clear because I tinted them with two drops of red pigment and some yellow, pink, and red fluorescent pigment for a little brightness, but if I hadn't they would be totally clear.

So what I did was just dab a bamboo skewer flat head down into the liquid and then onto the smooth silicone until it beaded up the natural way liquids do.  Some didn't turn out circular enough, but the greater majority of them are round and usable once they cure all the way.

Just showing off the various sizes that were created.

This is in actuality less liquid than in a couple thimbles believe it or not.

The awesome thing is I barely used enough apoxy resin to fill a couple thimbles.  I can make TONS of detail lenses in clear resin now and I can color cast them in any color pretty much.  I'm gonna try neon green next I think or maybe I'll do a bunch of different colors.  It's a possibility that I may gather up some variety packs of the lenses in various sizes and colors and sell a few if folks want them.  (They are incredibly useful and pretty I think.)  Now let me show off what they look like on some otherwise kinda crappy items.

Before adding lens onto this Gundam Fix Figuration FAZZ.

After adding lens onto the FAZZ.

                                            

Drehksturm Box Art Completed! Decay is awesome.

Hey All,
   I'm not dead, in fact I've been incredibly busy working on my mecha projects lately.  I haven't posted them for a reason but I will fill you all in on them soon.  I do however have awesome news that most of you who read this (all four of you hehe) already know; Decay has finished the first cast of the Drehksturm!  Yay!!

I must say it looks amazing, the painting and weathering looks beautiful, and the decals that Decay and Kamm designed and printed are perfect.  I am totally proud to be a part of the making of this kit, even though I had nothing to do with the painting or the decals, which may just be the coolest part.  I have taken my two favorite photos of Decay's post on this, (which you can find here) and used them to make the top and bottom labels for the box art.  There will be a cool surprise relative to the box labels that I will share soon, but for now let us just bask in the glory that is the culmination of at least three modeler's hard work.  And yeah I know I'm totally feeling egotistical that I had a part in such a cool looking project.  My hat is off to Marc and Kamm as well.  Love you guys and great job.

BOX ART!!

Thanks to all of you guys who have shown an interest in getting one of the drehksturm conversion kits, (Russ) and know that I'm working on getting the instruction manual together now, and will be making the casts in the weeks to come.  It's finally warm enough to start up castin' again.  As Marc said in his post however, since this is my first kit casting it is not the most user friendly kit, and if you haven't worked with resin before I suggest you maybe hold off on getting one.  I'll make the instructions as complete and thorough as I can, but I didn't use any peg guides, which would have helped a bit in assembly.  Most of the part just snap on the inner frame quite well, but there are those that need to be glued that you will have to visually line up.  I'll go into more detail on that for any interested parties.  I'm only gonna maybe cast at most 8-10 of these, and probably only like 5 or so if there are interested people.  The price is gonna be about $55-60 just for the cost of the materials used, no profit for me.  I just want to see people making them.  You gotta pay your own shipping though.  I hope to see a couple of you guys try one of these out.

In a separate tangent I have a project that I've been working on for the last few months almost completed, and I can't wait to share it but I want it to be a surprise.  Needless to say it is something that I have put all of myself into, so hopefully it will show in the work.  I will hopefully be able to announce this really soon, maybe in a few weeks.

Stay tuned mechaholics...