Lanzegeist Casting Update!

Hey all,
   I just wanted to do an update showing my progress with the kit casting.  Here is a photo of the parts that the wife and I have poured so far.

What we are doing is basically pouring the entire quantity that we need for each part to make 10 kits, and then moving on to the next set of parts.  It seems to be the most efficient way.  Like I said I am going to be casting 10 copies of the kit before we move, and so far I have to say 8 of them are reserved.  If you have let me know that you want one I appreciate it, but you may want to do so again so I know for sure.  If the number of kits requested is above 10 I may make a few exceptions up to maybe 12-14, but no promises as I do have time constraints and such.  So again if you want a kit cast, make sure to either comment below or better yet email me at onecoldnight@yahoo.com and use the subject header "lanzegeist kit".  That way I'll know to add you to my list and make sure yours is reserved.

Here is a video update showing basically what you see above, but with the moving pictures of a cinematograph!

Video link in case video is not embedded correctly:  Lanzegeist Casting Update Video!

Good news and bad news

Hey all,
    I guess the blog title sounds a bit more ominous than it really is, but it's been a day of mixed things.  I had planned to print out the drekky instruction manual and finish up the packing for sending out, but that was before our male ferret started having seizures and had to be put down.  It's been a rough year for relatives passing away.  Le sigh.  And the not necessarily comparable but still downer problem I was having with a particular mold today just compounded my already kinda crappy day.  (I have a particular mold where the surface of the mold keeps getting a weird matte surface quality to a part that is usually pretty glossy, the parts are still good but it just makes it look like there is a surface quality flaw and I don't know why it's happening.)  So today I just haven't really felt much in the mood to do anything productive. 

  I did, however decide that it would be a good day to maybe start rounding up the cured lenses and toy with them for a few minutes.

I'm pleased that a good portion of the lenses came out wonderful.  Some were oddly shaped or distorted and gotta be tossed out, but most were good.

I took one of my old kits that I modified a little bit when I was first learning to model (an old crappish kampfer mod I did) and cemented on a little bit oversized pink lens.  I used pink as in the animations usually the mono eyed mobile suits have pink eyes when the suit is on.  I used a slightly oversized eye because it catches the light a little better and shows off the clarity.  The smaller better sized version is harder to photograph well, but I do have plenty of those too.  I think I'm gonna use these for my SMS Kampfer conversion kit I'm gonna build soon.  Anyhow here are some eye lens photos.

DISCLAIMER: The work and paint on this kampfer head is old and I just grabbed it to test out the mono eye lens, it's not my current work.  

These took four hours, but they're pretty!

Hey all,
   I decided to go ahead and make a small mountain of mono eyes, lenses, and random round things tonight.  Not that I just had tons of extra time, but I couldn't wait to test the colors and get some small lenses cured.  I made sure to make tons of the pink ones for zeon mono eyes for any future builds like that sms kampfer conversion I got a little while ago.  I also have a neat idea for the clear lenses that I haven't seen done before that I plan to share soon once I make a test version.  (possible detail up add on part kit accessory)  But anyway here is my bunch of curing colored clear apoxy resin.

I mixed up the clear apoxy resin and since it has a 5 hour pot life (really more like 3.5 with the conditions in this room) I had plenty of time to color tint the various little pallets of apoxy.  I carefully used a bamboo skewer and dabbed it into the liquid and let gravity do the rest when I dabbed it again onto a smooth mold top.  I use the tops of various molds because they are smooth number one, and two because the apoxy won't cure to it.  Now there are some oblong shapes and circles that merged or were made mishapen, but no worries as if even half of them are good its a crapload of good lenses of various sizes and colors, and this in reality only took 65 grams of apoxy.  Yeah and I had a ton leftover because I'm stupid and always mix too much.  hehe.  So it would require even less than I used by half.  But you do need a certain amount of material just to make sure your mix ratio has a little play.

Neon Clear Casting!

Hey All,
    The neon yellow clear beam saber blade finally cured enough to demold and I wanted to show it off. 

I gotta say I like the coloring.  I think it will look sweeter once it's dunked in future floor polish.  I'm gonna try out a pink one next I think. 

The clear stand was cured enough to demold too.  I gotta say I really like it!

It still needs a little bit more cure time to harden all the way as this clear stuff takes FOEVAH!  But it will add to the kit presentation a lot and I think I really may use these for the sellable kits.  I am going to try to have an update on the different color casts of the clear lens parts next.  I may pour those tomorrow night in a variety of colors and sizes.  I also have a friend who is starting up working with aluminum so we all may have the capability of designing and making our own custom aluminum parts soon!  But I'll fill you all in as that happens.  He's working on making the LG thruster vents in aluminum right now, but I'll fill you all in as that happens.

Stay tuned mechaholics...

DIY Clear Tinted Detail Lenses

Hey All,
   I just had a kewl experience yesterday with an experiment I did.  I had poured a bunch of clear apoxy resin for my clear parts I'm casting for the kits I'm gonna sell, and I had a bunch of extra clear apoxy left over.  Let me start off by saying I hate wasting materials when I don't have to.  So with that in mind I had to find something to use the material for, and I found it.  Clear lenses!  Now these don't look clear because I tinted them with two drops of red pigment and some yellow, pink, and red fluorescent pigment for a little brightness, but if I hadn't they would be totally clear.

So what I did was just dab a bamboo skewer flat head down into the liquid and then onto the smooth silicone until it beaded up the natural way liquids do.  Some didn't turn out circular enough, but the greater majority of them are round and usable once they cure all the way.

Just showing off the various sizes that were created.

This is in actuality less liquid than in a couple thimbles believe it or not.

The awesome thing is I barely used enough apoxy resin to fill a couple thimbles.  I can make TONS of detail lenses in clear resin now and I can color cast them in any color pretty much.  I'm gonna try neon green next I think or maybe I'll do a bunch of different colors.  It's a possibility that I may gather up some variety packs of the lenses in various sizes and colors and sell a few if folks want them.  (They are incredibly useful and pretty I think.)  Now let me show off what they look like on some otherwise kinda crappy items.

Before adding lens onto this Gundam Fix Figuration FAZZ.

After adding lens onto the FAZZ.